MISCOM8220G Layer 3 Din-rail Industrial Ethernet Switch
- 5 -
2. Hardware installation and networking
2.1. Hardware structure
2.1.1. System structure
The system hardware is mainly composed of the following parts:
Switched network controller uses high-performance ASIC chip
technology to provide Layer 2 wire-speed forwarding of data packets
Fiber interface adopts optical transceiver module for stable performance
Power supply uses industrial grade power supply with over current, over
voltage and EMC protection
All data ports are EMC protected
2.1.2. Machine structure
The chassis of this product is a standard DIN rail structure. The whole
machine adopts a six-sided fully enclosed structure. The left and right side
panels of the chassis are made of single-ribbed aluminum profiles and are part
of the overall cooling system. Abandoning the traditional heat sink cooling form,
reducing the power consumption of the whole machine and improving the
stability of the system.
Figure 2-1 shows the dimensions of the MISCOM8220G: 156mm × 85mm
× 137.7mm.
Figure 2-1 Schematic diagram of the MISCOM8220G chassis
