Maiwe MISCOM7212GP Series, User Manual, Page: 12 / 20

MISCOM7212GP Series Industrial Gigabit POE Switch
- 8 -
place, fiber optic connectors is appropriate.

Avoid direct sunlight and away from heat sources or areas with strong
electromagnetic interference.

Standard 35mm DIN-rail installation. Check for suitable cables and
connectors.
Attention ：

Before installing or connecting Ethernet switch please make ensure that
disconnect the power line. Do not exceed Max. current. If exceeds the
maximum current, make the wire overheat, causing serious damage to the
equipment.

Separate the power cable and other cables, if the two paths must cross,
must ensure that the intersection of these lines are vertical.

Grounding and cabling can effectively suppress the noise caused by
electromagnetic interference. Before connect the switch with equipment please
connect GND first. Connected to the grounding screw from the ground surface
2.2.2. DIN-Rail Installation
This series equipment back panel have fixed well DIN rail-way connection
seat. If need installation, please check DIN rail way condition .
Main including 2 terms :

Checking DIN-Rail is fixed firm, DIN-rail is installed on other equipment,
whether there is enough space .

Checking DIN-Rail whether suitable for power input.

Please selected the correct position. As below behind picture shows:

Insert DIN-Rail into DIN-Rail slot and as schematics 2-1 shows turning
equipment.

As schematics 2-1 shows, insert DIN-rail into DIN-Rail slot and confirm
the switch reliable equipment installed on the DIN-rail.
2-1 DIN-rail installation