Installation Manual
Maipu Confidential & Proprietary Information
Page 15 of 21
Chapter 3 Installation
3.1 Preparing for Installation
3.1.1 Preparation Tool
Cross screwdriver
Antistatic wrist strap
Wire stripper
Cable needed:
Power cable
Console cable
RJ-45 connector reticle
Device needed:
Configuration terminal (can be PC)
3.1.2 Check the cabinet
Switch can install in the 19” standard cabinet. Device should be installed in frame.
Generally, one switch should install in one frame.
3.2 Installation Step
Switch can install in the 19” standard cabinet. The process of installation is as following::
Step 1: Examine grounding and stability of the cabinet. Use screw to fasten hanger to the
two sides of the front board and back board of the switch;
Step 2: Locate switch on the salver of the cabinet. Move it to the suitable location along
with the slide of the switch. Keep some space between switch and the slide.
Step 3: Fasten hanger to the fixed slide of the cabinet to guarantee the bracket of each
slot and hanger of the switch are fastened to the cabinet
