Maipu MP1800X-40, Installation Manual

Page: 32 / 65

Energization and Operation
MP1800X Series Router Installation Manual
4-4
copyright

2017Maipu, all rights reserved
Step 5:
Display the following COM1 Properties interface, set the baud rate as 9600, data bit as
8, parity check as none, stop bit as 1, and data flow control as none, and then click OK .
Figure 4-6 The COM1 Properties interface
Step 6:
Display the following test-HyperTerminal interface, and click Properties .
Figure 4-7 The test-HyperTerminal interface
Step 7:
Display the following “
test properties
” interface, click
Setting , select VT100 in Terminal
emulation , and click OK .