19.27 kW Pnc (Condensing)
24 - 22.0 kW Pn (Non condensing)
23.8 kW Pnc (Condensing)
30 - 30.18 kW Pn (Non condensing)
32.61 kW Pnc (Condensing)
All boilers automatically adjust their outputs according to the system load.
NOTE
: The maximum output of the 30 model is factory set at 22.0 kW (Pn).
This can be altered to 30.18 kW (Pn). See
3. It is designed for use on Natural Gas (G20).
4. The boiler is suitable for fully pumped open vented central heating and domestic hot water systems and sealed systems.
5. A label giving details of the model, serial number and Gas Council number is situated on the rear of the lower door panel (
).
6. The boiler data badge is positioned on the air box door (
7. The boiler is intended to be installed in residential / domestic environments on a governed meter supply only.
8. The boiler must be installed with one of the purpose designed flues such as the standard horizontal flue kit, part no 236921.
Fig. 1
Fig. 2
Summary of Contents for Main Heat 12
