Christian Maier GmbH & Co. KG
© 2019 by Christian Maier GmbH & Co. KG Maschinenfabrik. This document may not be copied or disclosed to third parties.
All rights, including copyright and property rights, reserved by Christian Maier GmbH Q Co. KG.
Operating Instructions _Series _H-HW_Part B_en – Version 10 – 01.09.2019
5 /57
B
1
General
1.1
Information on this Manual
This manual is intended for use by the operators, the maintenance and the inspection staff. It is divided into the
following sections:
Section 1 "General Part of the Operating Instructions":
(pages with designation B)
This section provides general information on the manual, on safety and on handling the product.
Section 2 "Specifications and Spare Parts":
(pages with designation S)
This section provides product-specific data.
Section 3 "Additional Information for Use in Hazardous Areas (EX areas)":
(pages with designation A)
(only available for products certified as per directive 2014/34/EU)
Staff and operators must have read and fully understood the operating instructions and must observe all
instructions it contains. Please note that we will not be liable in any way for any damages and operational
disruptions resulting from the failure to read and/or observe the operating instructions.
Read chapter 7 and the specific safety instructions in the individual chapters with particular care.
We reserve the right to technical modifications if such modifications are required to improve the rotary joint or
its accessories, i.e. details and descriptions may differ from the information given in this manual.
1.2
Explanations and Symbols
Symbol
Used for
Explanation
●
List
List of facts and instructions. No specific sequence required.
1.
Instructions consisting
of several individual
steps
Instructions consisting of several steps which must be
followed exactly in the sequence listed. Failure to observe
the instructions in the correct sequence may result in
damages or accidents.
[1]
Item number
Item number of the component mentioned in the
corresponding illustration.