background image

INSTRUCTION MANUAL FOR DISHWASHERS

 

 

UK 

Max. 

1 m 

 

With discharge pump (available 

on request)

 

  If the drain is not at a lower level than the base of the machine, you 

can use the version equipped with a discharge pump (available on 
request). 

  In this case the maximum drain height is 1 m. 

  Always check that the drain works properly and that it is not clogged. 

  All other solutions must be previously agreed upon and approved by 

the manufacturer. 

2.6

 

Rinse aid and detergent 

 

Rinse aid is dispensed by the hydraulic dispenser installed standard on the machine. 

  Dispensing of detergent is manual, even if installation of an automatic dispenser is always 

recommended. 

 

Dispensing is established based on water hardness by the installation technician, who will also calibrate 
the dispensers. 

  The level of liquids in the container must be high enough that it can be drawn. It must never empty 

completely, or be topped off with corrosive or impure products. 

NEVER use CHLORINE or HYPOCHLORITE based detergents. 

Chap 3

 

RISKS AND IMPORTANT WARNINGS 

 

This appliance is to be used only for the use for which it was expressly designed. All other uses are to be 
considered unfit and therefore dangerous. 

 

The specialised personnel who will install the machine are obliged to appropriately instruct the 
user on the appliance’s operation and any safety measures that are to be complied with, also by 
providing practical demonstrations. 

  Any type of service done on the machine, also in  case of failure, must be performed only by the 

manufacturer or by an authorised service centre and by qualified personnel, 

using only original spare 

parts

  Always disconnect or separate the machine from the electric and water networks before performing 

maintenance, repairs or cleaning. 

 

Untrained personnel must 

NOT

 use the machine. 

 

The machine must 

NOT

 

remain powered on when it is not in use.

 

 

 

NEVER 

open

 

the machine door quickly if it has not finished the cycle. 

 

NEVER

 

use

 

the machine without the factory-installed safety attachments

.

 

 

NEVER

 use

 

the machine for washing object of a type, shape, size or material not guaranteed for 

machine washing or not perfectly intact. 

 

NEVER

 

use

 

the appliance or its parts as a ladder or support for people, things or animals. 

 

NEVER

 overload

 

the open door of front-loading machines, which are sized to support only the rack 

loaded with kitchenware. 

 

NEVER

 

immerse

 

bare hands in the washing solutions. 

 

NEVER

 

turn the machine over after installation. 

 

 THE FOLLOWING IS ALSO IMPORTANT: 

 

Never start a wash programme without the overflow in the tub, where foreseen. 

 

Before you drain the tank, make sure you shut off the machine. 

 

Never place magnetic objects near the machine, it may start even when the door is open. 

 

Do not use the upper part of the machine as a support surface. 

 

The machine may not be used by persons who are unauthorized or who have not been properly trained. 

 

The installation technician is required to check for proper earthing. 

 

When testing is complete, the installation technician must issue a written statement concerning correct 
installation and testing in accordance with all standards and acceptable working practices.  

3.1

 

Normal service conditions 

Ambient Temperature  : 40°Cmax /4°Cmin ( average 30°C) 
Altitude                          : until 2000 metrical 
Relative humidity          
: max 30% at 40°C / max 90% at 20°C 
Transport and Storage : between 10°C and 55°C with peack until 70°C ( max 24 hrs )

 

Page 4 of 14

 

Summary of Contents for Evolution 501
















Reviews: