INSTRUCTION MANUAL FOR DISHWASHERS
Page 6 of 10
UK
Chap 4
USING THE MACHINE
4.1
Key and symbols
Referring to
Fig.1
:
1 ON/OFF
BUTTON
5 POWER
LED
2 DRAIN
BUTTON
6 CYCLE UNDERWAY
LED
3 PROGRAMME SELECTION
BUTTON
7 HEATING UNDERWAY
LED
4 START
BUTTON
The arrangement of buttons and leds may vary according to the machine type
4.2
Switching the dishwasher on
Referring to
Fig.2
:
Turn on the main power switch and open the external water tap.
Check the presence of the overflow.
Press
ON/OFF (1)
.
The
POWER
led comes on and filling begins automatically.
After filling comes the heating phase; the
HEATING UNDERWAY (7)
led stays on until the working
temperature is reached.
The optimal wash conditions have been reached.
4.3
Filling the rack
Referring to
Fig.3
,
to ensure the correct operation of the dishwasher follow the rules described below:
Use a suitable rack, fill without overloading and without overlapping the dishes.
Always wipe the dishes before placing in the dishwasher; do not put dishes with dry or solid
residues in the washer.
Place the empty dishes in the rack facing downwards.
Place plates and the like in the sloping rack, with the inner surface facing upwards.
Place the cutlery in the cutlery basket, handle end down.
Do not place silver and stainless steel cutlery in the same cutlery basket as this will turn the silver
brown and may corrode the steel.
Wash the dishes immediately after use, in order to prevent any residue from hardening and sticking
on them.
Use only solid, dishwasher-proof dishes.
4.4
Cycle selection and start-up
4.4.1 Under-counter
dishwashers
Select the washing cycle suited to the type of dishes using
PROGRAMME SELECTION (3)
; with
the button pressed, the shorter cycle is enabled
(Fig. 4)
.
Start the programme press the
START (4)
button, the
CYCLE UNDERWAY (6)
LED starts to flash
(Fig.5 )
.
When the cycle is completed the
CYCLE UNDERWAY (6)
led goes off
For rapid drying, remove the rack from the machine as soon as the cycle finishes.
To stop a wash cycle early, press down and hold the
START (4)
button for a few seconds.
