INSTRUCTION MANUAL FOR DISHWASHERS
Page 5 of 10
UK
Chap 3
RISKS AND IMPORTANT WARNINGS
This appliance is intended solely for the use for which has been designed. Any other use is
improper and hazardous.
The specialised technician responsible for installing the appliance must instruct the user on its
operation and any attendant safety measures, including practical demonstrations.
Only the manufacturer or an authorised service centre with qualified staff may work on the
machine, even in case of malfunction, using only original spare parts.
Always disconnect or isolate the machine from its power and water supplies before servicing,
repairing or cleaning it.
The machine may
NOT
be used by persons untrained in its use.
The machine may
NOT
be left powered up when not in use.
NEVER
open the machine quickly if it has not completed its cycle.
NEVER
use the machine with its guards removed.
NEVER
use the machine to wash objects of any form, size or material not guaranteed to be
machine-washable or not in good condition.
NEVER
use the machine or any of its assemblies as steps or support for persons, property or
animals.
NEVER
overload the open door of front-loading machines, which is rated only to support the
basket loaded with dishes.
NEVER
place your bare hands in the wash solution.
NEVER
overturn the machine after it has been installed.
If you notice any malfunction or fluid leak, immediately disconnect the power supply and shut off
the water supply.
Do not install the dishwasher in the vicinity of heat sources over 50°C.
NEVER
leave the dishwasher exposed to the weather (rain, direct sunlight, etc.)
The dishwasher may not be installed outdoors without proper cover.
Never start a wash programme without the overflow in the tub (as applicable).
Never place magnetic objects in the vicinity of the machine.
Do not use the top of the machine as a table or support.
The installer is responsible for checking that the grounding system is fully operational.
At the end of testing, the installer must issue a written declaration stating that the machine has
been installed and tested in accordance with established legislation and good practice.
DO NOT
change the position or tamper with the elements that compose the machine, these
operations could compromise its safety.
Weighted sound pressure level LpA ≤ 70 dB(A).
3.1
Normal operating conditions
Ambient temperature: 40°Cmax /4°Cmin (average 30°C)
Altitude : up to 2000 metres
Relative humidity : Max 30% at 40°C / max 90% at 20°C
