Maico touchTymp MI 26, Operation Manual

Page: 62 / 98

Operation Manual touchTymp MI 26 and MI 36 Version
8511780 Rev. 4 61 30/06/2021
5.5.5.3 Deleting Test Results
Results are deleted by the Delete button or turning-off the device. When Delete
is selected, each module is listed to confirm deletion (Figure 95).
Figure 95
NOTE : It is best practice to delete results when patient testing is complete.
5.5.5.4 Printing Test Results with the Built-in Printer
Test results can be directly printed with the built-in printer. Touch on the Print
button and a message box
“Processing print job”
will display. Printing from the
device will print all test results at once (i.e. Tympanometry , Acoustic Reflex,
Audiometry , etc.).
NOTE : The printout will contain the same content as displayed on the touchTymp.
5.5.5.5 Understanding the Print-Out for Audiometry (Built-In Printer)
The following describes the printout for Audiometry only (Figure 96).
Figure 96
1 MAICO logo and name of device
2 Facility info : Prints automatically those
fields that contain data (not shown if no data
is entered).
3 Patient data : provides the field name to
manually enter. Can be selected/deselected
in Settings (see section 5.6.4).
4 Examiner
: empty line for examiner‘s
signature.
5 Session date and time : shows the date and
time of the session as displayed on the device.
6 Test result Audiometry : consists of display
selected on the screen (i.e. graph, one
audiogram, or two audiogram).
NOTE : The printout will match what is displayed on the screen. The Display mode
( One audiogram , Two audiograms or Table ) is defined in the Settings (see section
5.6.16). Show masking table must be active to print masking levels.
1
2
3
4
6
5