Maico touchTymp MI 26, Operation Manual

Page: 66 / 98

Operation Manual touchTymp MI 26 and MI 36 Version
8511780 Rev. 4 65 30/06/2021
5.6.4 Settings
– Basic – Print
Figure 110
Automatic printout (Immittance) : An automatic printout is
directly generated upon the return of the probe into the probe
holder when
Probe into holder is selected (Figure 110).
NOTE : When setting is active, Audiometry must be
printed manually.
Figure 111
Info on printout : Select or deselect if the printout shall
show the Facility and Patient fields (Figure 111).
NOTE: Facility information can be entered into the
device. See section 5.6.6.
5.6.5 Settings
– Basic – Date & Time
Figure 112
Date format : Select the preferred date format to be
displayed in the Status Bar and printout (Figure 112).
Figure 113
Set date : Set the current date using the date control
(Figure 113).
Figure 114
Time format : Select the preferred clock, using the 12 or
24 hour time format (Figure 114).
Figure 115
Set time : Set the time by using the time control. If time
format 12 h is chosen a further setting is available for
selection of
AM/PM (Figure 115).