5
Ventilation levels:
Humidity pro-
tection, ventilation level 1 to 3 and
intermittent ventilation. Can be set with
manual, ECO mode supply air or ECO
mode exhaust air operating modes.
Room temperature:
Actual tempe-
rature = current room temperature.
Setpoint temperature can be set with
optional supplementary heating.
Season:
Summer or winter opera-
tion The season has to be changed
manually.
1.2 Main menu settings
For basic system settings. Depending on au-
thorisation (installer, owner, tenant), different
system parameters can be set.
1.3 Retrieve main menu
Here current system values such as tempe-
rature and humidity measurements, system
statuses or fault messages can be queried.
2 Mounting
i
For applicable safety regulations and
further information
Installation, com-
missioning and maintenance instruc-
tions for ventilation unit.
2.1
Qualifications of specialist installer
Only a
trained electrician
is permitted to
work on the electrics. You are considered a
trained electrician if your specialist training
and experience
●
means that you are familiar with the relevant
standards and guidelines
●
enables you to correctly and safely
undertake the electrical connections in
accordance with the wiring diagram in the
installation instructions
●
enables you to recognise and avoid risks
and hazards associated with electricity and
●
you are able to recognise and avoid risks
resulting from incorrect installations and
settings and the resultant hazards.
2.2 Scope of delivery
Touchscreen operating unit, mounting plate, con-
nector plug and these installation instructions.
2.3 Intended use
With the comfort control unit, the user can
operate the ventilation unit and undertake
individual settings on it. Numerous configu
-
ration options are available to the specialist
installer in the protected installer area of the
touchscreen operating unit.
Read the safety instructions in the instal-
lation instructions for the ventilation unit
before connecting the touchscreen opera-
ting unit
to the ventilation unit. Follow the
instructions.
2.4 Safety instructions
Danger from electric shock:
Before removing the front cover,
shut down all supply circuits (de-
activate the mains fuse) and se-
cure so they cannot be switched
back on. Attach warning sign in
clearly visible place.
Danger of injury when fans
are running:
Before removing
the front cover, wait until both
fans have stopped.
Danger of burning from hot
housing parts on units with
PTC heat register:
After re-
moving the front cover, do not
touch the heat register. First wait
until the heat register and the
housing parts have cooled off.
Store packaging material out of
the reach of children
Risk of
suffocation if swallowed.
