Maico ER GH, Mounting Instructions, Page: 17 / 32

10. Mounting preparations
17
Prepare plastic shutter:
Air outlet to top, left or right
Mounting on wall
Upwards air outlet direction:
Do not make
any changes (factory settings).
Air outlet direction to the left or right
1. Pull the shutter [3] out of the exhaust
socket, depending on the installation
position, rotate it (

fig. 6) and reinsert it.
Make sure that the shutter is pushed up
to stop in the exhaust socket.
As a rule, use the standard installation
position with upwards air outlet direction
for ceiling installation .
10.6 Conversion of exhaust socket for
air outlet towards rear
Before the conversion, pull the
shutter [3] out of the exhaust socket.
1. Fig. above: At the 4 positions [Z] , loosen
the 4 locking bolts [X] (push buttons) on
the exhaust socket (pull off).
2. Push the 4 bayonet hooks [W] in the
exhaust socket in the 4 slots [Y] sideways,
to the right and remove the exhaust
socket.
3. Fig. below: Rotate the exhaust socket so
that it is pointing to the rear.
6 7