Maico ER GH, Mounting Instructions

Page: 27 / 32

14. ER-AS extraction socket for WC odour extraction
27
14. ER-AS extraction socket for
WC odour extraction
ER GH housings can be connected to the
WC flushing pipe using the ER-AS extraction
socket.
A Ø 70 duct cross section facilitates low air
speeds in the connecting duct and an
effective, draft-free extraction of odours.
Pre-requirement for the connection:
A Ø 70 branch must be installed in the
flushing pipe of the concealed cistern.
Installation
1. Install ER-AS extraction socket as
described in chapter 11.1.6.
2. Connect the connection duct to the ER-AS
extraction socket and (at the branching
piece) to the concealed cistern’s flushing
pipe. Make sure the connections between
the connection duct and the ER-AS
extraction socket and the branch are tight.
3. For the assembly of fan inserts and covers

ER cover manual.
15. Spare parts
Spare parts may only be sourced
from and fitted by a specialist
installer.
Designation Article no.
Exhaust socket
0059.2046.0000
Shutter
E093.0608.0001
Exhaust element
on side
0059.2053.0000
Exhaust element
at rear
0059.2054.0000
In case of questions, please contact:
Maico Elektroapparate-Fabrik GmbH
Steinbeisstraße 20
78056 Villingen-Schwenningen
Germany
Tel. +49 7720 694 445
Fax +49 7720 694 175
E-mail: ersatzteilservice@maico.de
16