Using the Massager
Set up and connect to power.
• Slide the
[Power]
switch to the very
top position
for
M
Heat
mode.
• Slide the
[Power]
switch to the
middle position
for
Massage
Only
mode.
• Slide the
[Power]
switch to the
bottom
position
to power the
massager OFF.
Rub the massage head in a circular motion on your skin, avoiding
sensitive areas. Do not concentrate on one body part, but use in a
continuous motion, moving to different parts of the body.
Connecting Attachments
The massager comes with 3 snap-on
massage attachments. Place the
desired massage attachment onto the
head of the massager, and snap on.
Make sure the attachment is securely
attached before using the massager.
Maintenance & Storage
To clean the massager, first, disconnect from power. Wipe with a
soft, damp cloth using no abrasive cleaners.
Never place the unit
into or near any type of liquid.
• Keep away from all solvents and harsh detergents.
• DO NOT attempt to service or repair this massager. There are no
user-serviceable parts.
The massager should be stored away when it will not be used for a
long period of time. It is best stored in an airtight box or bag
(not
included)
, away from sources of light, heat, water and dust.
Connecting to Power
Warning: Never operate near water or touch with wet hands. Do not use
if the cord or plug is damaged. Read all safety warnings in this manual
before use.
Remove the protective cap
on the massager’s power
plug. Plug the power plug
into a nearby power outlet.
