en
13 | ACX2180H | Description of
unit
5.2
Display screen
When unit loads, the home screen will be displayed (Fig. 6).
This screen is accessible by pressing ( ) button in lower left
corner of the screen.
Fig. 7: ACX2180H Menu Selections
An Automatic or Manual process can be selected by touching
the word on the upper right side of the screen or by touching
the
(
MENU
) button in the lower left corner of the screen
and selecting which type of process is desired.
To select a function in the menu, touch finger to option.
If you need to enter free text, the numerical keypad can be
used.
5.3
Main Menu Options
The main menu of the graphical user interface allows user to
select the following functions:
Vehicle Selection
Automatic
Manual
Special functions
Maintenance
Setup
Each of the menu options will be described in detail later in the
manual.
5.4
Unit Features
5.4.1
EcoLOCK
®
couplers (optional)
EcoLOCK
®
is the intelligent coupler that with the suitable auto -
mated procedure in the software enables to:
Reduce the amount of non-condensable gases
formed inside the cylinder
Avoid the refrigerant (loss) dispersion in the air
during the disconnection of the couplers (Puff-effect)
Check possible Schrader valve leaks before
disconnection
Fig. 8: EcoLOCK ® Couplers
To connect the coupling, position the coupling on the parking
coupler, pull back the knurled section of the coupling element
and press carefully onto the connection (Fig. 9).
Fig. 9: Fastening quick release coupling
The service quick-release couplings are connected to the
service connections of the vehicle air conditioning system
during A/C service. When not in use, the service quick-
release couplings can be connected to the parking/flush
couplers
To remove the service quick-release couplings from the park
coupler, press the coupling slightly towards the connection
and carefully pull the knurled section back to unfasten it from
the coupler.
5.4.2
Locking caster brakes
Rolling of the ACX2180H can be prevented by locking the
caster brakes (Fig. 1, Pos. 8) at the front wheels.
5.4.3
Power supply cable and switch
The power supply cable is connected to the main power
input. When not in operation, the power supply cable can
be disconnected and hung on the handle. The ACX2180H
is switched on by toggling the rocker switch to the on
position.
Fig. 5: Display and control panel
8.
Low pressure gauge
9.
LCD Touch Screen
10.
Status and warning Indicator light
11.
High pressure gauge
12.
USB port
Summary of Contents for ACX2150
Page 1: ...MAHLE ACX2180H...
Page 2: ...en 2 ACX2180H...
