SL08_Rev01
Work Instruction Template
Template Released 8 November 2018
Work Instruction: Install Defrost 2 Spd No Cab
Defrost 2 Speed Heater No Cab (P/N 1202CUA00101N)
CONFIDENTIAL DOCUMENT
© 2020 Mahindra Vehicle Sales and Service, Inc. All Rights Reserved.
ROXOR is a registered trademark of Mahindra Vehicle Sales and Service, Inc.
Page 3 of 4
8. Cut out lower section. Check fitment and trim if needed.
Deburr and paint all rough areas.
9. Using (2) u-clips, install duct upward with (1) pan head screw.
Be sure it snaps into place, front to back.
10. Measure 20" and cut defrost hose. Remaining section should
be roughly 16". Left side will be longer side.
11. Affix foam around inside edge of lower distribution bowl.
12. Separate (2) register ball valves and install into (1) lower
distribution bowl.
13. Remove lower (2) M6 hex bolts from heater. Repeat for
opposite side of heater.
14. Install (1) lower distribution bowl re-using (4) M6 hex bolts.
15. If equipped, cut out wiper grommet section on register cover.