DIAGNOSTIC MANUAL MAN-00201
QUANTO
EMS
SEP 2012/Rev 1
The repair methods given by the manufacturer in this document are based on the technical specifications, current at the time of release. The methods may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from which the vehicles are manufactured. The reproduction, translation, transmission, in part of or whole of the present document,
are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd.,
will amount to unauthorized use and shall be liable for penalty/prosecution
© 2012 Mahindra & Mahindra Ltd.
`
P0704
CLUTCH NON PLAUSIBLE ERROR
CLUTCH SENSOR
The clutch pedal sensor is a hall effect sensor encompassing two hall chips mounted on fixed part of the
clutch pedal and a magnet mounted on the moving shank of the clutch pedal
DTC INFORMATION
PROBABLE CAUSES OF FAILURE
NORMAL OPERATION
Ignition ON
Clutch pedal sensor outputs a signal which corresponds to
the clutch pedal position and is within the range.
Clutch signals are received every time a gear change is
detected.
DTC DETECTING CONDITIONS
Ignition ON
EMS ECU supply voltage 8-16V
Gear change detected without clutch signal
DTC REACTIONS
ZFC shuts off.
HEALING CONDITION
Ignition Off/On
Open /short wiring
harness
Improper clutch pedal
sensor adjustment
Faulty clutch sensor
269