30
3.6. BUCKET LEVEL INDICATOR
3.6.1. Install bucket level
indicator rod assembly into
bucket level indicator tube
assembly.
3.6.2. Attach bucket level
indicator tube assembly to
base end of RH tilt cylinder
using 5/16 x 1-1/2" hardware.
3.6.3. Attach bucket level
indicator rod assembly to rod
end RH tilt cylinder using
5/16" x 1/2" hardware.
3.6.4. Adjust bucket level tube
for proper alignment with
bucket level rod by sliding
slotted bracket to desired
position and tightening bolt.
Hex Bolt 5/16"
x 1-1/2" Grade 5,
5/16" Lockwasher,
and 5/16" Flatwasher
Bucket Level
Indicator Tube
Assembly
Bucket Level
Indicator Rod
Assembly
Hex Bolt 5/16"
x 1/2" Grade 5 and
5/16" Lockwasher
3.6.5. After installing loader on tractor, position loader on
ground with bucket flat, then paint or mark end of bucket
level indicator rod so operator can identify when bucket
is level on ground.
Paint or
mark
end of
BLI rod.
3.7. STEERING STOP
3.7.1. Set steering stop out to a maximum of 29/32"
between top of nut and top of bolt head.
29/32"
Summary of Contents for ML170 series
Page 11: ...10 SAFETY DECALS...
Page 79: ...78 25 TORQUE CHART...
