Mahindra ALTURAS G4 2019, Owner'S Manual

Page: 145 / 340

© Copyright Mahindra and Mahindra Ltd. 092018
4-55
According to the vehicle conditions, the cruise control will be cancelled
when:
1.
The brake pedal is depressed or ESP is activated.
2.
The speed is decelerated below 40 km/h.
3.
Parking brake is applied while driving.
4.
The cruise control switch malfunction occurs.
5.
The brake switch malfunction or disconnection occurs.
6.
The shift lever is moved to the neutral position.
7.
The engine rpm gauge shows the engine running at approx.
4,400 rpm or higher.
If the cruise control is cancelled without normal conditions
described above, or an intermittent malfunction occurs, stop the
engine and remove the key. The system will reset and is back on
when restarting the engine.
When not using the cruise control, press the cruise control
ON/OFF switch and then the READY indicator light will go off.
• Abnormal changes of the gear selector lever can damage
the engine. Do not move the gear shift lever to Neutral while
driving at the set speed. Automatic transmission damage
may result
• The speed that has been set may not be maintained on uphill
or downhill slopes
• The speed may drop to less than the set speed on a steep
uphill grade. The accelerator must be used if you want to
maintain that speed
• The speed may increase to more than the set speed on a
steep downhill grade. When the speed increases too much,
turn off the cruise control
• Always keep the safe stopping distance and depress the
brake pedal when necessary
Using the Cruise Control on Hills
How well the cruise control works on hills depends on the speed,
load, and the steepness of the hill.
When going up steep hills, you may have to depress the accelerator
pedal to maintain your speed. When going downhill, you may have to
brake or shift to a lower gear to keep your speed down.
Applying the brake takes you out of the cruise control.
STARTING THE ENGINE AND DRIVING THE VEHICLE