16 Series, Model - 2816 4WD
To
e
-
in
Adjustment
T
O
CHECK THE T
OE-IN, USE THE FOLLOWING PROCEDURE:
1.
Put the tractor on level ground and the wheels in the straight ahead
position.
2
.
Place chalk marks at points A on the centerlines of both front tires at
the same height as the centerline of the hub cap.
3
.
Measure the distance (L
1
) between the chalk marks at points A.
4
.
Move the tractor forward a distance equal to one-half revolution of the
front wheels.
5.
The chalk marks will now be at points B. Measure the distance (L
2
)
between the chalk marks at points B.
6.
The figure of L
2
minus L
1
is the toe-in. Make sure the toe-in is
adjusted properly
. If not, adjust the toe-in.
FRONT AXLE TYPE
MFD
T
OE-IN (L
2
– L
1
)
0 t0 0.20 INCH (0 to 5 mm)
TURN THE WHEELS
ONE-HALF
REVOLUTION
82
TIRES/WHEELS/SP
ACING/BALLAST
_______________________________________
