12
c-MIG 2800 / 3300
EN
4.3.3. Wire speed adjustment
In case manual mode is selected at
Synergic selector
direct wire speed is
to set up (in the range from 0 to 25m/min)
For synergic mode is to adjust pre
–set value of the wire speed. In case
knob is in the central position, pre-set values is to be used. Correction to
the + or to
– is possible for individual requirements.
4.3.4. Cycle / Spot welding timer
To set up welding time for cycle and spot welding. The idle time for cycle
welding is always equal to welding time.
Adjustment range is 0.1sec to 5sec.
4.3.5. Burn back adjustment
Length of the outstanding wire after the weld setup.
4.4.
Welding current / voltage display
Machines are equipped with real welding voltage and current display with implemented
HOLD function. Display is measuring and displaying welding voltage and current in real time
during welding. After weld is stopped, there remain average values from last weld displayed
on the display.
25
12
0
6
9
15
18
21
m/min
1
3
24
0,1
0,2
0,3
0,5
1
2
3
4
5
sec
