MAHA TPS II, Original Operating Instructions

Page: 11 / 17

Operations TPS II Eurosystem TRUCK
D1 1005BA1-GB01 7
The peak of the green arrow indicates the
target speed, the bottom indicates the
tolerance range (
±
5 km/h). The black arrow
shows the actual speed of the vehicle.
5 Conduct the test
Accelerate the vehicle up to the indicated
target value as per vehicle speedometer.
⇒
The recorded test values will be
displayed.
If the actual speed is within the tolerance
range for 3 sec., the test values will
automatically be stored.
⇒
The next target speed will be indicated.
The measuring value can also be stored by pressing the <F5> key, in order to display the next
target speed. If a remote control is not available, a second person is needed to store the value
by using the keyboard.
Use the <F6>-key to go to the previous target speed.
Use the <F7>-key to go to the next target speed.
6 Repeat the test
The test must be repeated for every target
speed as described in step 4.
The test can be aborted by pressing the
<ESC>-key.
7 Exit the test stand with lift beam
Press <T> on the keyboard or on the
remote control. After the vehicle is lifted,
slowly exit the roller set in forward direction.
It is possible to intervene in the automatic test procedure by pressing <F5>. The measuring
values will be stored and the test procedure continues. If the test is repeated, the measuring
values in the temporary memory will be overwritten.