5
BAZ72201-en
Pos: 19 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/K/Üb erschrift 1.1: Kraftaufnehmer anschließen @ 30\mod_1359724252355_ 75.docx @ 1707468 @ 2 @ 1
2.3
Connecting the Force Sensor
Pos: 20 / Technische Dokumentation/Leistungsmess technik/Z7 Z ubehör allgemein/ 2201 S KM 2/ BA/Inhalt: Z722 Kraftaufnehmer anschließen @ 30\mod_ 1359724039010_ 75.docx @ 1707423 @ @ 1
•
Connect the force sensor to the 9-pin D-sub connector.
•
The offset adjustment is carried out.
If the offset adjustment is not possible, the message "Offset error" appears on the
display and the offset adjustment is repeated.
No load must be applied to the force sensor during the offset adjustment.
The offset adjustment can also be started by pressing either button for at least
2 seconds.
•
The device switches off automatically when the switch-off time has expired,
provided the force value does not exceed 20 N during this period. The switch-
off time can be set using EEPROM variable 4.
•
The maximum value memory on the display is deleted when the device switch-
es off or either button is pressed.
Pos: 21 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/S/Überschrift 1.1: S ervice-M enü aufrufen @ 20\mod_ 1271855208904_ 75.docx @ 838924 @ 2 @ 1
2.4
Opening the Service Menu
Pos: 22 / Technische Dokumentation/Leistungsmess technik/Z7 Z ubehör allgemein/ 2201 S KM 2/ BA/Inhalt: Z722 Service-Menü aufrufen @ 29\mod_ 1345718462292_75.d ocx @ 1647071 @ @ 1
The programming is done at the factory. Any changes to the preset variables may
result in malfunction.
1 Press the left-hand button.
2 Connect the power supply unit.
3 Hold the left-hand button, until the Menu Selection appears.
4 Remove the power supply unit.
Pos: 23 / Technische Dokumentation/Alle Geräte/Überschriften/ Überschriften 1.1/K/Üb erschrift 1.1: Kontras t eins tellen @ 18\mod_ 1254378393453_ 75.docx @ 453775 @ 2 @ 1
2.5
Setting the Contrast
Pos: 24 / Technische Dokumentation/Leistungsmess technik/Z7 Z ubehör allgemein/ 2201 S KM 2/ BA/Inhalt: Z722 Kontrast einstellen @ 29\mod_ 1345718527873_75.d ocx @ 1647115 @ @ 1
1 Open menu item "Contrast" using the right-hand button.
2 Reduce the contrast using the left-hand button, increase it using the right-hand
button.
3 Save your setting by pressing the left-hand button for 3 s.
4 Exit the service menu by pressing the left-hand button for 3 s again.
Pos: 25 /----- Format-----/MAN UELLER UM BRUCH Seitenumbruch @ 0\m od_1134403577687_ 0.docx @ 1277 @ @ 1