7) As charging continues, the light indicators will display the relative progress of charge.
8) Charger will conclude the rapid charging process with an audible tone and the right red light will be
the only light illuminated. Remove battery from unit; it is ready to use.
Note: When charging a 12v battery pack, the unit will flash the yellow light on the LED indicator. This
is normal and does not mean there is a problem.
Clip Lead Accessory
One item that may be purchased for the charger that could come in handy is the clip lead accessory
available from your local dealer. This accessory will allow you to charge batteries that do not line up
with the adjustable contacts on the charger. Or use the clip leads to attach the leads of your test
equipment. Another use is to install loose rechargeables in any battery holder that will place 4, 5, 6, 8 or
10 rechargeable cells in series. Then using the clip leads attach the charger to the holder to recharge the
all cells in the holder at once.
Tips for First Time User
· The most difficult part of the process for the first time user is making a good contact between the unit
and the battery pack. The following are some tips to help in that process.
· Use the side positioning aid (1) to align the battery pack onto the magnetic charging stage. If your
battery pack is too large, remove side positioning aid.
· Open adjustment chamber by pulling on the adjustment chamber latch (14).
· Within the adjustment chamber are the contact alignment arms (5) and the adjustment bar (4) that can
be moved left and right (contact alignment arms) and up and down (adjustment bar). Carefully move
these parts to align the pins on the contact alignment arms to contact with the contacts on the battery
packs.
· To simplify the alignment process, Maha has designed a scale system beneath the adjustment arms
which are marked with measurements. These markings can be used in conjunctions with a chart
provided in this manual.
· When contact is made, close the adjustment chamber to it's original position.
· The positioning aid stopper (3) can be used as a mechanism to help align your battery.
Scale System Diagram
Locate the pin contacts that point directly at the ruler, located inside the adjustment chamber. We have
made a list of some common battery packs for your convenience, to aid in finding the correct contact
settings.
Page 5 of 7
MH-C777 Universal Charger Conditioner Instruction Manual
10/25/2009
http://www.bills2way.com/equip/c777manual.html
