background image

Español     Italiano     Nederlands     Français    

English

Deutsch

21

Adaptors for all Julie HP models

Adaptor  

Rotor diameter/Installation

Order code

Adaptor 5

203/Int. Standard 6" Front

0722 321

Adaptor 6

180/Postmount 6" Front

0722 322

Adaptor 7

203/Postmount 6" Front

0722 323

Adaptor 8

203/Rockshox Boxxer

0722 324

Adaptor 9

203/Int. Standard Rear

0722 325

Adaptor 10

180/Int. Standard Rear

0722 424

Adaptor 11

160/Int. Standard 6" Front 

0722 425

203/Int. Standard 8" Front (Fox 40)

Adaptor 12

180/Int. Standard 6" Front

0722 426

160/Int. Standard Rear

Adaptor 26

203 Postmount 7” Front (Thor)

0724 131

Direct Mount         203/Postmount 8” Front (Wotan, Travis etc.)

180/Postmount 7” Front (Thor)

(no adaptor!)

160/Postmount 6”  Front

WARNING! 

Always make sure, that the fixing bolts are screwed in to a depth of at least 
8 mm. This corresponds to around 8 full turns! 
Should this not be the case, longer bolts, with a minimum hardness of 8.8 should be
used and secured using blue Loctite.

Specifications are subejct to change without prior notice

!

Visit our website magura.com for further information, tech tips and free online help!!

Summary of Contents for JULIE hp























Reviews: