MAGUIRE MPL Series, Installation Operation & Maintenance, Page: 8 / 23

M A G U I R E P R O D U C T S , I N C .
8
M P L M L S e r i e s V e n t u r i L o a d e r s

MOUNTING CONTROL BOXES (all models except MPL)
On MCF AUGER FEEDERS:
If this loader to be used with an MCF concentrate feeder, attach the control box to the end of the
Feeder control box as shown in Figure A. This can be done using the existing sheet metal screws
in the MCF controller.
WEIGH SCALE BLENDERS:
If this loader is to be used with a Weigh Scale Blender FEEDER, then a bracket is provided. Bolt
this bracket to the plate that is mounted under the auger feeder drive motor and then bolt the
loader control box to the bracket. This is shown in Figure C.
MICRO BLENDERS and OTHER EQUIPMENT:
If we have not provided a separate mounting bracket for the controller, then you should select
whatever position or location that serves your needs best.