30
Magtrol Hysteresis Dynamometers
Chapter 3 – Installation/Configuration
SETUP
3.2
EARTH GROUND
Before proceeding any further, the dynamometer must be connected to earth ground. The earth
ground is located on the top of the dynamometer as indicated in the following diagrams by the earth
ground symbol.
EARTH
GROUND
Figure 3–4 HD 100–500 Series Top View
The following diagram is to be referenced for all HD-700, -800 series and ED dynamometers.
CAUTION
BRAKE SURFACES MAY BECOME HOT
CAUTION
LIFTING BY BRAKE ASSEMBLY
MAY CAUSE DAMAGE TO
TORQUE SENSOR
EARTH
GROUND
Figure 3–5 HD-800 Series Top View
