Connections
Main connections
Connect a high-grade shielded power cable (at least 3x1.5mm) to the IEC
input and to your wall socket.
Make sure that your wall socket provides good ground before connecting
the power cable.
Since it runs fully passive, it works from AC 100 Volt to 250 Volt - 50/60Hz.
Check the polarity (LIVE) immediately after the first time of usage and
correct the wall plug if needed.
Connect devices
You can connect any kind of audio/video or electrical device to a total of
six power outlets on the back panel of TESLA to exploit the filtered power.
Live (Phase) connection is always in the right pin of each outlet.
(See the drawing above).
For the safety of your equipment!
Make sure that all your equipment is turned OFF before any connection!
Never exceed the total maximum limits absorption rated at 10A for
115/230V.
