63
APPENDIX E. USAGE ID DEFINITIONS
This appendix is from the following document found on www.usb.org: Universal Serial Bus
HID Usage Tables, Version 1.12 and specifically for this manual, Section 10, Keyboard/Keypad
Page (0x07).
KEYBOARD/KEYPAD PAGE (0X07)
This section is the Usage Page for key codes to be used in implementing a USB keyboard. A
Boot Keyboard (84-, 101- or 104-key) should at a minimum support all associated usage codes as
indicated in the “Boot” column below.
The usage type of all key codes is Selectors (Sel), except for the modifier keys Keyboard Left
Control (0x224) to Keyboard Right GUI (0x231) which are Dynamic Flags (DV).
Note
A general note on Usages and languages: Due to the variation of keyboards from
language to language, it is not feasible to specify exact key mappings for every
language. Where this list is not specific for a key function in a language, the closest
equivalent key position should be used, so that a keyboard may be modified for a
different language by simply printing different keycaps. One example is the Y key on a
North American keyboard. In Germany this is typically Z. Rather than changing the
keyboard firmware to put the Z Usage into that place in the descriptor list, the vendor
should use the Y Usage on both the North American and German keyboards. This
continues to be the existing practice in the industry, in order to minimize the number of
changes to the electronics to accommodate other languages.
Table E-1. Keyboard/Keypad
Usage
ID
(Dec)
Usage ID
(Hex)
Usage Name
Ref:
Typical
AT-101
Position
PC
-AT
Mac
UNI
X
Boot
0
00
Reserved (no event indicated)
9
N/A
√
√
√
4/101/104
1
01
Keyboard ErrorRollOver
9
N/A
√
√
√
4/101/104
2
02
Keyboard POSTFail
9
N/A
√
√
√
4/101/104
3
03
Keyboard ErrorUndefined
9
N/A
√
√
√
4/101/104
4
04
Keyboard a and A
4
31
√
√
√
4/101/104
5
05
Keyboard b and B
50
√
√
√
4/101/104
6
06
Keyboard c and C
4
48
√
√
√
4/101/104
7
07
Keyboard d and D
33
√
√
√
4/101/104
8
08
Keyboard e and E
19
√
√
√
4/101/104
9
09
Keyboard f and F
34
√
√
√
4/101/104
10
0A
Keyboard g and G
35
√
√
√
4/101/104
11
0B
Keyboard h and H
36
√
√
√
4/101/104
12
0C
Keyboard i and I
24
√
√
√
4/101/104
Summary of Contents for MICRSafe
