manualshive.com logo in svg

Magtek MICRSafe, Technical Reference Manual

Share
Download
Magtek MICRSafe Technical Reference Manual Download Page 14

MICRSafe with 3-Track MSR 

 

 

 

6 

USB DRIVER INSTALLATION (WINDOWS) 

 
On hosts with the Windows operating system, the first time the MICRSafe is plugged into a 
specific USB port, Windows will open a dialog box which will guide you through the process of 
installing a driver for the device; follow the instructions given in the dialog box.  Windows will 
install the driver that is used for HID keyboard devices; this driver is a basic component of all 
modern versions of the Windows operating system.  Sometimes, Windows will find all the files it 
needs.  Other times, Windows will need to know the location of the files it needs.  If Windows 
prompts for the file locations, insert the CD that was used to install Windows on your PC and 
point Windows to the CD’s root directory.  Windows should find all the files it needs there.  
Once completed, the driver installation process described above will not recur unless the device 
is subsequently plugged into a different USB port. After this installation, the device can 
communicate with user’s application programs such as MICRbase (P/N 22000021) to read 
checks, credit cards and setup configurations. 

Summary of Contents for MICRSafe
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands