1 - Introduction
DynaPro| Secure Cryptographic Device for PIN and Data Entry | Installation and Operation Manual
Page 14 of 40 (
D99875586-41
)
1.9
Function Buttons (Soft Keys)
The three function buttons or
soft keys
are located below the display. These buttons are programmable
for use with display-based prompts.
Figure 1-2 - Function Buttons
1.10
Low-Power Standby Mode
When the Windows operating system shuts down or is suspended, DynaPro enters
sleep mode
.
1.11
Magnetic Card Reading
DynaPro contains a MagneSafe card reader that encrypts card data at the point of swipe to protect the
cardholder’s personal information. The reader incorporates MagTek’s 3-track encrypting IntelliHead, a
magnetic read head which has encapsulated and securely potted electronics that reads, decodes, and
encrypts card data within the head. This technology secures the magnetic stripe data at the earliest point
in the transaction chain—the initial swipe.
In addition, as a card is swiped through the reader, through the use of MagnePrint technology the card can
be authenticated immediately, either by Magensa.net or by another system, to determine whether the card
is counterfeit or has been altered.
The card reader is capable of reading any ISO or AAMVA encoded magnetic stripe data.
1.12
Chip Card Reading
DynaPro includes a chip card (ICC) reader. The card is inserted from the front of the device under the
keypad.
1.13
Contactless Card Reading
DynaPro includes an optional contactless reader. The card or payment device is tapped above the display.
