3 - Installation
DynaPro| Secure Cryptographic Device for PIN and Data Entry | Installation and Operation Manual
Page 19 of 40 (
D99875586-41
)
3
Installation
Installing DynaPro is straightforward: The acquirer configures the Certificate Authority, public keys,
terminal and payment brand settings before deployment; end users need only set up a host with
appropriate software, configure the software, and connect the device to the host. This section provides
general information about solutions that incorporate DynaPro, including host software, connecting the
device, and charging the device.
3.1
About Inspection
It is important to regularly and thoroughly inspect a device in live usage, and its immediate surroundings,
to make sure malicious individuals have not tampered with it. MagTek recommends inspection training
for all device operators, and an inspection schedule with checkpoints in place to make sure inspections are
being done as specified and as scheduled.
Before the device is deployed, it is also important to inspect the packaging to make sure it has not been
tampered with in storage or in transit.
3.2
About Software
In any solution, DynaPro is connected to a host, which must have software installed that knows how to
communicate with the device, and which is capable of processing transactions. To set up the host to work
with DynaPro, follow the installation and configuration instructions provided by the vendor of the host or
the host software. For information about developing custom host software, see section
