2 - General Description
DynaFlex II Go| Secure Card Reader | PCI PTS POI v6.2 Security Policy
Page 10 of 18 (
D998200596-100
)
2.3.2
Firmware Identification
The most recent firmware versions for DynaFlex II Go products are
1000009446-AA0-PCI
for the
secure bootloader (Boot1 FW),
1000009421-AA0-PCI
for the core firmware (Main FW), and
1000009327-AA0-PCI
for the Bluetooth LE Firmware Version. The lowercase x in firmware versions
indicates minor non-security related changes. The secure bootloader firmware version also covers the
initial bootloader (Boot0) permanently programmed into the device. Any changes to either Boot0 or
Boot1 will result in a change to the Boot1 FW version that is visible to the user, reported by the device,
and listed on the PCI Approved Devices website.
All device identification information, including firmware versions and PCI Hardware ID, is accessible by
connecting DynaFlex II Go to a host device via USB or Bluetooth LE, using the latest software provided
by MagTek, as seen in
Figure 2-6 - Device Information Screen
The host user can also can retrieve device information at any time using
Command 0xD101 Get
Property
as described in
D998200597 DynaFlex II Go Programmer’s Manual (COMMANDS)
.
Figure 2-6 - Device Information Screen
