Magtek ADYNAMO, Programmer'S Reference Manual

Page: 36 / 42

6 - Commands
aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, BulleT| Secure Card Reader Authenticator | Programmer’s Reference (Android)
Page 36 of 42 ( D99875728-31 )
6 Commands
Custom software can use the sendCommandToDevice method to send direct commands to the device.
This section provides information about commonly used commands.
6.1 Discovery
To send a command to device, use:
public void sendCommandToDevice(string command)
Parameters: Use “C10206C20503840900” as command string for audio readers.
Return Value:
The following device information will be retrieved.
Device SN, internal: Device serial number created by chip manufacturer. Use
getDeviceSerial
method to retrieve data.
Device SN, MagTek: Device serial number created by MagTek. Use
getDeviceSerialMagTek
method to retrieve data.
Device Firmware Part Number: Device firmware part number. Use
getFirmware
method to retrieve
data.
Device Model Name: Device model name. Use
getDeviceName
method to retrieve data.
Device TLV Version: Device TLV version. Use getTLVVersion method to retrieve data.
Device Part Number: Device part number. Use
getDevicePartNumber
method to retrieve data.
Capability - MSR: 0 = No MSR, 1 = MSR. Use
getCapMSR
method to retrieve data.
Capability - TRACKS:

0 = Supported tracks: None.

1 = Supported tracks: Track1.

2 = Supported tracks: Track2.

3 = Supported tracks: Track1, Track2.

4 = Supported tracks: Track3.

5 = Supported tracks: Track1, Track3.

6 = Supported tracks: Track2, Track3.

7 = Supported tracks: Track1, Track2, Track3.
Use
getCapTracks
method to retrieve data.
Capability - MagStripe Encryption: 0 = No Encryption, 1 = TripDES DUKPT. Use
getCapMagStripeEncryption
method to retrieve data.