3 –MTSCRA Class Methods
aDynamo, uDynamo, Dynamag, DynaMAX, eDynamo, BulleT| Secure Card Reader Authenticator | Programmer’s Reference (Android)
Page 23 of 42 (
D99875728-31
)
Bit 5 = Reserved (always set to zero)
Bit 6 = Reserved (always set to zero)
Bit 7 = Reserved (always set to zero)
Bit 8 = Reserved (always set to zero)
Bit 9 = Initial DUKPT key injected (Secondary DUKPT Key)
Bit 10 = DUKPT Key used for encryption, 0=Primary, 1=Secondary
Bit 11 = DUKPT Key Variant used to encrypt data, 0=PIN Variant, 1=Data Variant/Bidirectional
Bits 12–15 = Unassigned (always set to Zero)
3.45
getFirmware
Retrieves firmware version.
public string getFirmware()
Parameters: None
Return Value:
String representing firmware version
3.46
getMagTekDeviceSerial
Retrieves MagTek device serial number.
public string getMagTekDeviceSerial()
Parameters: None
Return Value:
String representing MagTek device serial number
3.47
getResponseData
Retrieves response data.
public string getResponseData()
Parameters: None
Return Value:
String representing response data.
3.48
getResponseType
Retrieves response type.
public string getResponseType()
Parameters: None
Return Value:
String representing response type. For Audio Reader, always “C101”.
