Compliance
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by MagTek could void the user’s authority
to operate this equipment.
CE STANDARDS
Testing for compliance with CE requirements was performed by an independent laboratory. The unit
under test was found compliant with standards established for Class B devices.
UL/CSA
This product is recognized per UL 60950 1, 2nd Edition, 2011 12 19 (Information Technology
Equipment - Safety - Part 1: General Requirements), CSA C22.2 No. 60950 1 07, 2nd Edition, 2011
12 (Information Technology Equipment - Safety - Part 1: General Requirements).
ROHS STATEMENT
When ordered as RoHS compliant, this product meets the Electrical and Electronic Equipment (EEE)
Reduction of Hazardous Substances (RoHS) European Directive 2002/95/EC. The marking is clearly
recognizable, either as written words like “Pb-free,” “lead-free,” or as another clear symbol ( ).
How to Temporarily Place tDynamo in
Docking Stand
To temporarily dock the device for convenient charging, follow these steps:
1.
If the docking stand will be mounted to a countertop, do that first.
2. Make sure the docking stand is connected to a USB host.
3. Make sure the device’s docking stand contacts are clean and
unobstructed.
4. Place tDynamo all the way into the docking stand. The device powers
on automatically and begins charging.
tDynamo is placed in the stand and the stand is mounted to the countertop. This
device may be locked or may be ready for grab-and-go transactions.
How to Lock tDynamo in Docking Stand
Do not leave the round key installed in the docking stand. The key is
designed to be removed to deter unauthorized removal of the device.
To permanently attach the device to the docking stand, follow these steps:
1.
Make sure tDynamo is configured to use the docking contacts as its
primary connection. If it is configured to use another connection, use
that connection first to change the configuration.
2. Follow the steps above to place the device on the docking stand.
3. Use the included round key to turn the locking screw on the back of the
stand to lock the device in place.
4. Remove the key and set it aside for future use, such as cleaning or
servicing the device. It has a key ring / string hanger loop integrated
into its handle for convenience. Do not leave the round key installed in
the docking stand.
5.
Make sure the device is firmly locked into the stand.
tDynamo is placed in the stand and the stand is mounted to the countertop. Using
the locking key for mounted stationary transactions. The key is then locked away for
safe keeping.
Please note that the use of this accessory with an Apple product may affect wireless performance. Apple®, Apple Pay®, OS X®, iPhone®, iPad®, iPad Air®, iPad Pro®, Lightning®, and Mac® are trademarks of Apple Inc., registered in the U.S. and other countries.
EMV® is a registered trademark in the U.S. and other countries and an unregistered trademark elsewhere. The EMV trademark is owned by EMVCo, LLC. The Contactless Indicator mark, consisting of four graduating arcs, is a trademark owned by and used with
permission of EMVCo, LLC.
MAGTEK: Registered to ISO 9001:2015 © Copyright 2021 MagTek, Inc. PN D998200276 rev 20 4/21
MagTek
®
Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | support 651-415-6800 | f 562-546-6301 | www.magtek.com
Pb
Temporary/Locked and Compliance
tDynamo Stand - PN 21079820 - Secure Card Reader Authenticator
