Network Settings
AHD Hybrid DVR User Manual
45
②
Check the IP address and port of the transfer media server in the ECMS/NVMS. The
default server port for auto report is 2009. If it is modified, please go to the transfer
media interface to check.
③
Enable the auto report in the ECMS when adding a new device. Then self-define device
ID and input the remaining information of the device in the ECMS/NVMS.
④
Input the above-mentioned server IP, server port and device ID in the server interface.
Then click “Apply” button to save the setting. Now, the ECMS/NVMS system will
automatically connect this device.
11.5 NAT
①
Go to Main Menu
Setup
Network
NAT interface.
②
Enable NAT and input the NAT Server (The default NAT Server is
www.autonat.com
).
③
Click “Apply” to save the settings.
11.6 Other Settings
If your device is set to use PPPoE as its default network connection, you may set up DDNS to
be used in connection. The setting steps are as follows:
①
Enable DDNS server and then select the DDNS server type.
②
Enter user name, password and host domain name of the registered website.
③
Click “Test” button to test the effectiveness of the relevant information.
