MAGSWITCH Pro Vertical Featherboard
P/N: 81101302
+ 1(303) 468.0622
magswitch.com
1101444 r01
For more information, contact our Application Engineers at +1.303.486.0622 or via magswitch.com
Page 2
Safety
•
Items or body parts between the gripping surface of the magnet and ferromagnetic material are at risk of crushing and
impact forces.
•
Never exceed the maximum rated load of Magswitch tools. This may result in an unsafe or dangerous condition.
•
DO NOT attempt to alter the device in any way. This will void the warranty and may result in an unsafe or dangerous
condition.
•
DO NOT attempt to disassemble the Magswitch magnet; there are no user serviceable parts inside.
•
All Magswitch products are designed for normal worksite/jobsite conditions. Do not use underwater or in a hazardous
environment unless specifically designed for that purpose.
•
DO NOT use a Magswitch product if it is damaged or not working properly. Severe injury can occur if this device is not used
properly and safely.
•
Ensure Magswitch MagJigs are stored in the OFF position when not in contact with ferromagnetic materials.
•
DO NOT turn the magnet ON unless it is in contact with ferromagnetic metal. Actuation off-target will generate a strong,
static, projected magnetic field which can accelerate, draw-in, and trap ferromagnetic material and damage magnetic
storage media.
•
DO NOT expose standard Magswitch tools to temperatures above 176°Fahrenheit (80°Celsius). High temperatures will
permanently degrade the magnet’s effectiveness and may result in an unsafe condition.
•
Always keep the bottom of the magnet clean and free of debris and rust. If needed, wipe with WD40 or light oil. The bottom
surface of the magnet must be flat, smooth, and in contact with steel to hold properly.
•
Thicker steels will be held more strongly than thinner sheet. Steels with high alloy and carbon content will not be held as
strongly.
Warranty
Magswitch Limited Warranty
Magswitch products are covered by a one year limited warranty on material and workmanship. Warranty is non-transferable. Magswitch
reserves the right to inspect all product claims under warranty. Any alteration of the device voids this warranty. User assumes all risk for the
proper use of this device and for ensuring product suitability for intended application. This warranty shall not cover any incidental or
consequential damages due to the improper use or failure of this device. All Magswitch products are covered under International and U.S.
Patent
s 6,707,360 & 7,012,495. Add’l patents pending.
All Magswitch products are covered under International Patents
. Australian Patents: 753496, 2006294433, Canadian Patents: 2,392,772, 2,458,251, Chinese Patent:
254155, European Patent: 1243006, Indian Patent: 219575, Korean(South) Patent: 10-0728448, Mexican Patent: 236,352, New Zealand Patent: 518865, Singapore
Patents: 88931; 103413, South Africa Patents: 2002/3752; 2004/1785, US Patents: 6,707,360; 7,012,495. Additional Patents and Patent Applications Pending in Hong
Kong, South Korea, China, Spain, Brazil, China, Japan. Trade Mark Registered in: European Union, Germany, Brazil, China
WARNING:
This product can expose you to chemicals including nickel and tetrafluoroethylene, which are
known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
WARNING:
This product can expose you to chemicals including toluene, which are known to the State of
California to cause birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov
WARNING:
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a
substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or
other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
