47
After use
1. To ensure the instrument operates at optimal performance it should be
regularly cleaned.
2. Always switch the instrument OFF before cleaning.
3.
The housing can be cleaned with a damp cloth, taking care that no
water enters the product.
4. DO NOT immerse the electrical/optical parts of the product in water or
other liquids, and never hold it under running water.
5. Any lenses can be cleaned using a cotton bud with a small amount of
distilled water or alcohol.
6. After cleaning, ensure that all parts dry properly before use.
7. The product should be stored carefully, so that it is protected from dust
and scratches.
Troubleshooting
Error Code
Message
Cause
Solution
Err
Out of measuring range.
Use the device within the
range.
Err1
Received signal is too weak.
Use the target plate or
change the target surface.
Err2
Received signal is too
strong.
Target is too reflective. Use
the target plate or change
the target surface.
Err3
Low battery voltage.
Charge the battery.
Err4
The ambient temperature is
out of the working range.
Use the device in the
specified operating
temperature.
5063022087256_MNL_IN_V02.indd 47
5063022087256_MNL_IN_V02.indd 47
19/05/2023 4:32:04 pm
19/05/2023 4:32:04 pm
