3
Once you have securely
tightened the quick-release
plate to your camera,
replace the plate (with the
camera) into the VPH-10 by
sliding it back in under the
guides until it cannot go in any further. Then push down
firmly until the quick-release lever snaps into the locked
position. Be sure to position the plate so that the lens
faces away from the Tilt/Pan bar.
Using the VPH-10
There are two controls for adjusting/locking the movements
on the VPH-10.
1
The Pan-Lock knob controls
the panning movement.
Turning it clockwise tightens
the tension until it locks
completely. Turning it
counterclockwise loosens
the tension for greater
freedom of motion.
2
The Tilt-Lock knob controls
the tilting movement.
Turning it clockwise
tightens the tension until it
locks completely. Turning
counterclockwise loosens
it for greater freedom of
motion.
3
For panning while shooting, turn the Pan-Lock knob
counterclockwise to release tension and loosen
movement. Use tilt/pan bar to adjust camera position.
Turn knob clockwise to tighten and lock.
4
For tilting while shooting, turn Tilt-Lock knob
counterclockwise to release tension and loosen
movement. Use Tilt/Pan bar to adjust the camera
position. Turn knob clockwise to tighten and lock.