Attaching the VPH-10 to Your Tripod
1
Your VPH-10 comes with a bushing that
adapts the 3/8 tripod mount to use with
1/4-20 screws.
2
Choose the bushing
that fits your tripod.
Screw one side into the
base of the VPH-10,
and then attach the
VPH-10 onto the tripod.
If you’re using a very
small tripod, you may find it easier to hold the VPH-
10 steady and screw on the tripod.
Mounting Your Camera on the VPH-10
1
Firmly grasp the quick-release lever and rotate it
180° so the flat side is against the quick-release
plate, and it locks into place. This will release the
plate, and it will pop up. Slide the plate forward and
pull up on it to remove from the VPH-10.
2
Use the thumbscrew on the quick-release plate
to attach it to your camera. Many video cameras
have an additional space that accommodates the
retractable alignment pin on the plate. Take care
that it fits into place. Make sure the thumbscrew is
flush against the bottom of the plate.