5
ENGINE SAFETY
Internal combustion engines present special hazards during operation and fueling! Failure to follow the
safety guidelines described below could result in severe injury or death. Read and follow all safety warnings
described in the
engine operator's manual. A copy of this manual was supplied with unit when it was
shipped from the factory.
•
DO NOT
run engine indoors or in an area with poor ventilation. Engine exhaust contains carbon
monoxide, a deadly, odorless and colorless gas which, if inhaled, can cause nausea, fainting or death.
Only use this unit outside and away from windows, doors and ventillation equipment.
•
DO NOT
fill fuel tank near an open flame, while smoking, or while engine is running.
DO NOT
fill tank
in an enclosed area with poor ventilation.
•
DO NOT
operate with the fuel tank cap loose or missing.
•
DO NOT
touch or lean against hot exhaust or engine parts.
•
DO NOT
clean air filter with gasoline or other types of low flash point solvents.
•
Keep hands, feet and loose clothing away from moving parts on the engine.
SPECIFICATIONS
Read this manual carefully before attempting to use this pump. The potential for property damage, personal injury
or death exists if this equipment is misused or installed incorrectly. Read all of the manuals included with this unit.
Each manual details specific information regarding items such as set-up, use and service requirements.
Specifica-
tions are subject to change without notice.
MAGNUM MODEL
MTP200
MTP300
MTP400
Pump Output
Fitting Size .......................................... 2” NPTM ........................... 3” NPTM............................ 4” NPTM
Maximum Discharge Head.................. 92 ft (28 m) ....................... 92 ft (28 m)........................ 95 ft (29 m)
Maximum Suction Head ...................... 25 ft (7.6 m) ...................... 25 ft (7.6 m)....................... 25 ft (7.6 m)
Maximum Discharge ........................... 185 gpm (700 Lpm) .......... 357 gpm (1351 Lpm)......... 569 gpm (2154 Lpm)
Engine Specifications
Engine Make ....................................... Honda ............................... Honda ............................... Honda
Engine Model ...................................... GX160 .............................. GX240............................... GX340
Power - net prime* .............................. 4.8 hp (3.6 kW) ................. 7.1 hp (5.3 kW) ................. 9.5 hp (7.1 kW)
Fuel Consumption - net prime............. 0.25 gph (0.95 Lph) .......... 0.54 gph (2.04 Lph)........... 0.62 gph (2.35 Lph)
Approximate Run Time ....................... 3.3 hours........................... 2.4 hours ........................... 2.4 hours
Capacities
Fuel Tank ............................................ 0.82 gal (3.1 L) ................. 1.40 gal (5.3 L).................. 1.61 gal (6.1 L)
Weights and Dimensions
Dry Weight .......................................... 85 lbs (39 kg).................... 127 lbs (58 kg) .................. 151 lbs (69 kg)
Operating Weight ............................... 91 lbs (41 kg).................... 137 lbs (62 kg) .................. 162 lbs (73 kg)
Dimensions (L x W x H) ...................... 25.3 x 18.6 x 19.4 in ......... 25.9 x 19.0 x 21.1 in.......... 28.9 x 19.0 x 22.4 in
643 x 472 x 493 mm ......... 658 x 483 x 536 mm ......... 734 x 483 x 569 mm
* The power rating of the engine indicated in this document is the net power output tested on a production engine
for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary
from this value. Actual power output for the engine installed in the final machine will vary depending on numerous
factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other
variables.
