Magnum MFM-PS, Product Instruction Manual

Page: 12 / 22

12
3. How to use
(3) Selecting the folding type
One of the six folding types (Single, Gate,
Letter, Zigzag, Double, Parallel Fold-out)
can be selected. Press the desired folding
type key.
(4) Before folding, press Test key, Table A/B move
to the position of designated fold type, one sheet
will be folded. Check the paper has been folded
correctly. (In case of correcting slanting folding,
refer to Adjustment on Chapter 9).
(5) Note: If Table A or B has been adjusted, press Test key before continuous folding, or the adjustment
will not be accepted, Table A / B will return to origin before the adjustment. Press the Start/Stop key, the
system will continuously fold the paper, and the counter is in addition counting. When the Start/Stop key
is pressed while the system is in operation, the system will stop the operation. If only required number of
sheets need to be folded, please refer to chapter 6 Subtraction Counter.
3.1 Standard Folding of Non-standard size Paper
(1) Measure the paper length
(2) Input the paper length - Press the select key and
select the paper length input mode. Press clear/reset
key. Input paper length by using numerical key.
Note: Input length number should be bigger than B6,
smaller that A3, otherwise it will not register.