- 6 -
6
UNPACKING YOUR MD 801 MEDIA TUNER
Carefully inspect all sides of the shipping carton for damage. If there are marks or
holes in the carton make note of the location in relation to the unit inside. Any
obvious dents or scuff marks should alert you to the possibility of damage. Carefully
remove the MD Wi Fi Tuner Plus from the end caps and wrapping, inspect all sides.
Pay special attention to the corresponding areas on the unit where damage was
found to the shipping carton. If damage is evident, document the type and extent of
the damage, then repack the unit and call the dealer.
KINDLY DO NOT SEND THE UNIT BACK TO THE SHIPPER UNTIL YOU HAVE BEEN
ASKED TO DO SO.
DO NOT DISCARD THE PACKING MATERIALS AND CARTONS. Should there be a
necessity to return the unit for any reason, it must arrive safely and suitably
packaged in order for our receiver to accept it from the carrier. If the unit has
incurred damage as a result of improper packaging, it is not likely that a claim for
the damage against the carrier will be successful.
Likewise, we will ship your unit back to you only in factory-approved packaging,
however, if the unit were to arrive at the factory on anything other than factory
approved packaging, we reserve the right to return the unit in factory-approved
packaging and charge the cost of the packaging to the shipper. This is the only way
we can assure you of a safe return (damage by carrier excepted).
External resources
To operate the MD 801, the following external resources are needed:
•
a power source (100-240 V mains supply),
•
a wired (Ethernet) or wireless (Wi-Fi) network (provided through a router) with
appropriate permissions and password if necessary (for Internet Tuner and
Network Music player modes),
•
broadband Internet access (for Internet Tuner mode and Internet Software
Update),
•
a music library stored on the network or on a USB mass storage device (for
Music player modes),
•
an external audio source (for Aux in mode).