background image

- 16 - 

LIMITED WARRANTY 

Register your product at www.magnumdynalab.com 

 

Magnum Dynalab Ltd. herein referred to as the “manufacturer” guarantees 

this product to be free of defect in both material and workmanship and agrees to 
remedy any such defect or replace any defective component at no charge for a 
period of two years from date of sale to the first end user. This warranty is void if 
the product has been found to be subjected to misuse, abuse, lightning strike, 
unauthorized service, damaged in transit or has been altered or repaired in such 
a way as to detract from its performance, reliability or its safe operation. All 
tubes are covered for 12 months. 
 

Should such defect be discovered and it falls within the terms of this 

guarantee, the manufacturer will correct the defect in workmanship and/or 
replace any defective component with a new one of similar capability and value. 
This warranty does not apply to the cabinet or appearance items such as the 
faceplate, control knobs or meter lenses nor does it cover any expenses in 
shipping the unit to the appropriate service depot.  
 

The foregoing is in lieu of any other warranties expressed, implied or 

statutory and the manufacturer neither assumes nor authorizes any person to 
assume for it any other obligation or liability in the connection with the sale of this 
product. This warranty is not transferable except by written authorization from 
the manufacturer.  
 

In order to qualify under the terms of the above warranty, all items must be 

returned to the appropriate factory service depot with all shipping charges 
prepaid in lieu of having previously registered the purchase of the unit by 
completing and returning the attached Registration Card, the unit must be 
accompanied by proof from an authorized Magnum Dynalab Ltd. dealer.  
 

YOUR LOCATION 

RETURN SHIPPING ADDRESS 

Within the USA 

Magnum Dynalab c/o Trans American 
2775 Broadway, Buffalo, NY, USA 
14227-1043 
PHONE: 1-800-551-4130 

Within Canada 

Magnum Dynalab Ltd.  
8 Strathearn Avenue, Unit # 9 
Brampton, ON, Canada 
L6T 4L9 
PHONE: 1-800-551-4130 

Other Countries 

Contact selling dealer 

 

TO PREVENT FIRE SHOCK OR HAZARD, DO NOT EXPOSE THIS APPLIANCE TO 
RAIN OR MOISTURE. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT 
REMOVE COVER OR FACEPLATE, NO USER SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE PERSONNEL.  

 

 

Summary of Contents for MD 100T

















Reviews: