Magnum MCR-35 Product Instruction Manual Download Page 6

Page: 6 / 7

Operating the creaser

One operator is required when the machine is working.

Please do not push the handle with force, this could cause injury and damage to the system.

• Make sure the position and size of the document you are creasing is correct and accurate.

• If only one crease is needed, fix the position of the right positioning vernier according to the creasing

size.

• If two creases are needed, i.e a book spine. Move the right positioning vernier to the necessary position

and fix, then move the left positioning vernier to the correct position and fix accordingly to the creasing

size and position.

When moving the positioning verniers, please hold its head up and move the model parallel. Please do not

move with its head as this could cause damage to the system.

When moving the positioning verniers to the different positions please secure with the screws manually.

• When the positioning vernier is fixed in its position, place the creasing document against the mechanism

core protection cover and the fixed position vernier.

• If only one crease is needed move the paper rightwards and place against the fixed right side positioning

vernier. Push the operation handle downward then release and remove the document.

• If two creases are needed move the paper rightwards first and place the document against the fixed right

hand side positioning vernier. Push the operation handle downward then release it and then move the

paper leftwards, place it against the left side positioning vernier. Push the operation handle downwards,

release and remove the document.

Summary of Contents for MCR-35







