M C C - 3 5 A S
31
5.9 Feature Function
5.9.1 Register Mark
The register mark is much better for machine to position the images since that
the register mark and images relative position is the same which could get rid
of the shift caused by printing.
5.9.1.1
How
to
Create
a
Register
Mark
The register mark (black area) is always near the leading edge and right edge.
The Mark register only work if it is in right size and right place.
1. Reg slit mark(X) should be between 100-117 mm from the right edge of
paper; Reg cut mark (Y) should be between 3-15 mm from leading edge
2. The black mark itself should be more than 3*5 (L>=5mm, W>=3mm)
3. All area above or right of the mark (Area ‘a’) should be blank, because other
color may affect the mark reader.
4. The register mark reference point is the top right point of the mark.
5.9.1.2
How
to
Use
Register
Mark
1. Input the register mark position data which is from the printing template.
Such as when creating the register mark X is 100mm, Y is 4mm. Reg slit
mark should be 100. Reg cut mark should be 4. All the data is theoretical
value.
