Magnum Magnum XR Series, Service Instructions Manual

Page: 29 / 36

309044 29
Technical Data
M
AGNUM
XR5 M
AGNUM
XR7 M
AGNUM
XR9
Working pressure range 0 to 2800 psi
(0 to 19 MPa, 0 to 193 bar) 0 to 3000 psi
(0 to 21 MPa, 0 to 207 bar) 0 to 3000 psi
(0 to 21 MPa, 0 to 207 bar)
Electric motor (open-frame,
permanent magnet DC) 5.8 Amp 5.8 Amp 4.9 Amp
Operating horsepower 5/8 3/4 7/8
Maximum delivery (with tip) 0.24 gpm (0.91 lpm) 0.31 gpm (1.17 lpm) 0.38 gpm (1.44 lpm)
Paint hose 25 ft (7.6 m) x 1/4 in. 50 ft (15.2 m) x 1/4 in. 50 ft (15.2 m) x 1/4 in.
Maximum tip hole size 0.015 in. (0.38 mm) 0.017 in. (0.43 mm) 0.019 in. (0.48 mm)
Weight, sprayer only 23 lb (10 kg) 33 lb (15 kg) 36 lb (16 kg)
Weight, sprayer, hose, & gun 26 lb (12 kg) 38 lb (17 kg) 41 lb (19 kg)
Dimensions 13.75 in. (34.9 cm) L
11 in. (27.9 cm) W
17 in. (43.2 cm) H 19.5 in. (49.5 cm) L
17.25 in. (43.8 cm) W
40.75 in. (103.5 cm) H
Height with folded handle is
26 in. (66 cm)
19.5 in. (49.5 cm) L
19 in. (48.3 cm) W
40 in. (101.6 cm) H
Height with folded handle is
26 in. (66 cm)
Electrical cord
See Grounding and Electrical
Requirements on page 6 for
extension cord lengths.
16 AWG, 3 wire, 6 ft (1.8 m) 16 AWG, 3 wire, 6 ft (1.8 m) 16 AWG, 3 wire, 10 ft (3 m)
Pump inlet fitting 3/4 in. internal thread (standard garden hose thread)
Fluid outlet fitting 1/4 npsm external thread
Inlet screen on suction tube 14 mesh (1300 micron)
Wetted parts, pump & hose stainless steel, brass, leather, ultra-high molecular weight polyethylene (UHMWPE), carbide,
nylon, PVC, zinc-aluminum alloy
Wetted parts, spray gun SG1: aluminum, brass, carbide, nylon, plated steel, stainless steel, UHMWPE
SG2/SG3: aluminum, brass, carbide, nylon, plated steel, stainless steel, UHMWPE, zinc
Generator requirement 1500 Watt minimum
Electrical power requirement 120V AC, 60 Hz, 1 phase, 15A
Storage temperature range
{
*
–30
_
to 160
_
F (–35
_
to 71
_
C)
Operating temperature
range
* *
40
_
to 115
_
F (4
_
to 46
_
C)
{
Damage to plastic parts may result if impact occurs in low-temperature conditions.
* When pump is stored with non-freezing fluid.
* *
Changes in paint viscosity at very low or very high temperatures may affect sprayer performance.