manualshive.com logo in svg

Magnum Cruiser Ci6, User Manual, Page: 11 / 29

Share
Download
Magnum Cruiser Ci6 User Manual Download Page 11

Charger functions 

Charge cycle and LED indicators for lithium-ion battery

LED

STATUS

Green 

Battery not connected yet 

Red 

Charging 

Green 

Charging completed 

The LED light (1) on the charger keeps you constantly informed about the charge state of your battery. 

Troubleshooting your charger 
Please check: 

- Check that the power cable is properly connected to the wall outlet and the battery socket.

- Check that the contacts of the charger and battery are clean and not damaged or bent.

- Check that the battery isn’t damaged or defective in any way.

If the battery will not charge: 
- Unplug the charger from the outlet then plug it back in.

- Check that the outlet your charger is plugged into is functioning properly, if necessary connect other devices to it to confirm.

- Check the contacts of the plug connections.

- If charging is still not possible, please have the battery and charger checked by a Magnum Bikes licensed dealer.

Important instructions for the battery 

Important information, which you should read before use: 
- The batteries of the vehicle are approximately 50% charged when new.

- Before using the battery for the first time please fully charge the battery.

- The battery develops its max. output after approx. five discharge / charge cycles.

USE 

11 

Summary of Contents for Cruiser Ci6






























Reviews:

No comments